Sony Digital HDVS HDC-900 Maintenance Manual

Also see for HDC-900/L: Installation and maintenance manual Operation manual Maintenance manual

6-21 (E)HDC-900/950 MM(H SAW) (H PARA)(V SAW) (V PARA)6-6. Video System Level Adjustment (When using MSU)Adjustment Procedures1. Adjust the white balance.WHITE button/MSU-700A → ON (lit)2. If the shading is monitored, proceed as followsMSU menu operation:. MAINTENANCE button → ON (lit). Touch panel operation[Adjusting] → [White|Shading] → [R]. Adjustment Items: H Saw, H Para, V Saw, V Para3. Adjust for G-ch in the same manner.4. Adjust for B-ch in the same manner.5. Adjust the white balance.WHITE button/MSU-700A → ON (lit)Lens File StoreMSU menu operation:. FILE button → ON (lit). Touch panel operation[Lens|File] → [Lens|Store] → [Store]Adjustment for Lens Extender/ShrinkerWhen using the lens extender or lens shrinker, perform thefollowing adjustments after the completion of lens filestore.Using the lens extender6. Set the setup menu as follows.MENU: OPERATIONPAGE: LENS FILEITEM: FILE(Select the file in accordance with the lens attached. Ifthere is no appropriate file, select NO OFFSET, thenchange the name of lens with MSU.)7. Lens extender (x2) → ON8. Perform procedures 2 to 5, then perform the lens filestore again.9. Lens extender (x2) → OFFUsing the lens shrinker10. Set the setup menu as follows.MENU: OPERATIONPAGE: LENS FILEITEM: FILE(Select the file in accordance with the lens attached. Ifthere is no appropriate file, select NO OFFSET, thenchange the name of lens with MSU.)11. Lens shrinker (x0.8) → ON12. Perform procedures 2 to 5, then perform the lens filestore again.13. Lens shrinker (x0.8) → OFF