Sony DMX-NV1 Attachment Manual

Also see for BRAVIA DMX-NV1: Operating instructions Operating instructions Quick setup guide Quick setup guide Specifications

4-116-032-11(1)DMX-NV1Attachment Guide© Sony Corporation 2008 Printed in U.S.A.For TV Models: KDL-40WL140/KDL-46WL140/KDL-52WL140Required Items for AssemblyYour Sony TV with XMB™ (1) / BRAVIA® Internet Video Link (DMX-NV1) (1)/ Cable Cover (1)/ MountingBracket (1)/ Plastic Fastener (2)/ Mounting Knob (2)/ Phillips Screwdriver (for removal only; not supplied)To BeginOn the back of the TV, locate the attachment holes situated on the right side, above the rear input panel.These instructions are shown without cables attached. We recommend that you familiarize yourself with the attachmentprocess, then review the BRAVIA Internet Video Link’s Quick Setup Guide (supplied) for information on connectingthe cables.1 Align the holes on the bracket (supplied) to the holeson the back of your TV.2 Insert the 2 Plastic Fasteners (supplied) into the holes,then press in the head of the fasteners using yourfinger until they click.~Do not push in the head of the fastener until you haveinserted the fastener into the bracket and the hole on theTV. Do not use a screwdriver to tighten the screws.Plastic Fasteners

/ 2

Related manuals for Sony BRAVIA DMX-NV1