Sony DMX-NV1 Quick Setup Guide (For DMX-NV1 model bundled with KDLxxWL140 Televisions) Quick Setup Manual

Also see for BRAVIA DMX-NV1: Operating instructions Operating instructions Quick setup guide Specifications Specifications

NETWORK VIDEO RECEIVER Quick Setup GuideDMX-NV1© Sony Corporation 2008. Printed in USA. 4-116-031-11(1)BRAVIA® Internet Video Link Accessoriesz Ethernet cable required(not supplied).Setting up the BRAVIA® Internet Video Linkz If you need to configure a fixed IP address or proxy server, check the Operating Instruction Manual for more information.POWERPORT 1 PORT 2 PORT 3 PORT 4POWERPORT 1Gaming Adapter as Wireless BridgeEthernet CableWireless RouterGamingAdapterReceiverPOWERPORT 1 PORT 2 PORT 3 PORT 4Exis ting Electrica l Wiri n gPowerline Ethernet AdapterEthernet CableEthernet CableRouterPowerlineEthernetAdapterReceiverPOWERPORT 1 PORT 2 PORT 3 PORT 4Direct to RouterEthernet CableRouterPOWERINTERNETModemReceiverA DC IN 9V: Connect the AC adapter to this port. Do notplug into the wall outlet at this time.B DMex: Connect the small end of the USB cable to thisport.C LAN: Connect an Ethernet cable (not supplied) to thisport.D HDMI OUT: Connect the L-shaped end of the HDMI cableto this port.Your BRAVIA LCD TV includes BRAVIA Internet Video Link. The Sony BRAVIA Internet Video Link brings on-demand entertainment and information from the Internet, including movies, news, traffic, and weather.High-speed Internet access is also required. Power off your TV before beginning the setup.OUTLANDC IN 9VNETWORKINPUTSERVICE% $ #"Front ofReceiverDCBAB1 Remove Cable CoverRemove the cable cover to expose the portslocated on the bottom of the receiver.Please read all instructions before beginning the installation.Refer to the separate Attachment Guide for instructions on mounting to your TV.NETWORKPower LEDNetwork LED2 Connect CablesConnect the cables in the order shown below.3 Connect to TVB Connect the large end of the USB cableto the DMe X/SERVICE port on the TV.D Connect the straight end of the HDMI cableto any HDMI port on the TV.4 Connect to the InternetChoose one of the following recommendations to connect the BRAVIA Internet Video Link receiver to the Internet with easy “plug and play.” Connect an Ethernet cable(not supplied) between the receiver and your Internet source.5 Verify Connectiona. Plug in the receiver and power on the TV.b. Once the receiver and TV are powered on,confirm the LED lights.Standard Definition video: 802.11gHigh Definition video: 802.11nStandard Definition video: HomePlug Turbo,HomePlug AV, UPA, HD-PLCHigh Definition video: HomePlug AV, UPA, HD-PLC6 Confirm ConnectionFollow these instructions to confirm.a. Press the DMeX button on your TV’s remote controlto view the connection status.z If “Feature available with DMeX module” appears on thescreen, wait a few moments and try again.z The first time the receiver is connected to theInternet, the software may require an update.b. Follow the instructions on-screen to complete RegionSetup.z Default country is the United States. Press the Bbutton to select a different country.7 Attach Cable CoverSlide the cable cover back into place.BOUTLAN DC IN 9VOUTLAN DC IN 9VFront ofReceiverz For instructions on attaching to the TV, see theseparate Attachment Guide.When you see... Receiver...PowerLEDGreen is powered “On.”Red is not connected. Check all cablecomponents.Orange is in update mode.NetworkLEDGreen is connected to the Internet.BlinkingGreenhas network activity.z Look for the serial number found on the bottom ofthe receiver to record in the Owner’s Record.-------------------------------Owner’s RecordRecord the serialnumber below:CABLE / ANTENNADMe /xSERVICE41 3 132INVIDEO INVIDEOL(MONO)AUDIORS VIDEOCOMPONENT INLRP BRGBDIGITALAUDIOOUT(OPTICAL)PC INAUDIO OUT(VAR/FIX)(1080p/1080i/720p/480p/480i)1AUDIOLRAUDIOAUDIO AUDIOR LP RYBDBAc. When your region is setup, the receiver will attempt toconnect to the Internet. Upon succesful connection, you willsee the screen below.For Your ConveniencePlease contact Sony Customer Support directly if you have questions on the use of your BRAVIA InternetVideo Link after reading your Quick Setup Guide and Operating Instruction Manual (available on theInternet at http://internet.sony.tv/manual).United Stateshttp://esupport.sony.com/bravialinkOr to speak with a support representative:1-866-918-BIVL (2485)Please Do Not Return the Product to the StoreContact Sony Customer Support at:d. Press the HOME button on your remote control to display theXMBTM. These menu icons associated with the receiver willappear when the service content providers are ready.InternetVideo IconNetwork IconVideo IconMedia Category Barz IMPORTANT: Do not press the INPUT button on the remotecontrol to access the BRAVIA™ Internet Video Link. It isavailable on the XMBTM.NETWORK VIDEO RECEIVER Quick Setup GuideDMX-NV1© Sony Corporation 2007. Printed in USA.3-126-111-11(1)AC Adapter withAC Power CordAttachment GuideQuick Setup GuideReceiver (DMX-NV1)& Cable CoverMounting BracketMounting KnobsPlastic FastenersUSB CableHDMI Cable4-116-032-11(1)DMX-NV1Attachment Guide© Sony Corporation 2008Printed in U.S.A.For TV Models: KDL-40WL140/KDL-46WL140/KDL-52WL140Required Items for AssemblyYour Sony TV with XMB™ (1) / BRAVIA ® Internet Video Link (DMX-NV1) (1)/ Cable Cover (1)/ MountingBracket (1)/ Plastic Fastener (2)/ Mounting Knob (2)/ Phillips Screwdriver (for removal only; not supplied)To BeginOn the back of the TV, locate the attachment holes situated on the right side, above the rear input panel.These instructions are shown without cables attached. We recommend that you familiarize yourself with the attachmentprocess, then review the BRAVIA Internet Video Link’s Quick Setup Guide (supplied) for information on connectingthe cables.1 Align the holes on the bracket (supplied) to the holeson the back of your TV.2 Insert the 2 Plastic Fasteners (supplied) into the holes,then press in the head of the fasteners using yourfinger until they click.~Do not push in the head of the fastener until you haveinserted the fastener into the bracket and the hole on theTV. Do not use a screwdriver to tighten the screws.Plastic Fastenersz If the LEDs do not light up in green, confirm that allcables are securely connected.

/ 2

Related manuals for Sony BRAVIA DMX-NV1