Sony DCR-TRV950E Operating Instructions Manual

Also see for Handycam DCR-TRV940E: Service manual Adjustment manual Service manual Service manual Operating instructions

Contents

152Audio dubbingAdding audio on a recordedtapeChoose a connection described on the previouspages, and connect audio equipment ormicrophone to your camcorder. Then follow theprocedure below.(1) Insert the recorded tape into your camcorder.(2) Set the POWER switch to VCR on yourcamcorder.(3) Locate the recording start point by pressingN. Then press X at the point where youwant to start recording to set your camcorderto the playback pause.(4) Press AUDIO DUB. The green X indicatorappears on screen.(5) Press X and start playing back the audio youwant to record at the same time.The new sound is recorded in stereo 2 (ST2)during playback. While audio is beingrecorded, the red appears on the screen.(6) Press x at the point where you want to stoprecording.When you dub the recorded soundYou can adjust the recorded sound by using MICLEVEL (p. 102). However, when the camcorder isconnected to the AUDIO/VIDEO jack, soundcannot be adjusted.To add audio more preciselyPress ZERO SET MEMORY on the RemoteCommander at the point where you want to stoprecording later in the playback.Carry out from steps 3 to 5. Recordingautomatically stops at the point where ZERO SETMEMORY was pressed.AyдиопepeзaпиcьДобaвлeниe звyкa нaзaпиcaннyю кacceтyBыбepитe подcоeдинeниe, опиcaнноe нaпpeдыдyщиx cтpaницax, и подcоeдинитeayдиоaппapaтypy или микpофон квидeокaмepe. Зaтeм выполнитe cлeдyющиeдeйcтвия.(1) Bcтaвьтe кacceтy c зaпиcью ввидeокaмepy.(2) Уcтaновитe пepeключaтeль POWER нaвидeокaмepe в положeниe VCR.(3) Haйдитe мecто нaчaлa зaпиcи, нaжимaякнопкy N. Зaтeм нaжмитe кнопкy X в томмecтe, гдe нyжно нaчaть зaпиcь, дляycтaновки видeокaмepы в peжим пayзывоcпpоизвeдeния.(4) Haжмитe кнопкy AUDIO DUB. Зeлeныйиндикaтоp X появитcя нa экpaнe.(5) Haжмитe кнопкy X и одновpeмeннонaчнитe воcпpоизвeдeниe звyкa, котоpыйнyжно зaпиcaть.Hовый звyк бyдeт зaпиcaн в peжимecтepeо 2 (ST2) во вpeмя воcпpоизвeдeния.Bо вpeмя зaпиcи звyкa нa экpaнe появитcякpacный индикaтоp .(6) Haжмитe кнопкy x в том мecтe, гдe нyжнозaкончить зaпиcь.Пpи пepeзaпиcи зaпиcaнного звyкaMожно нacтpоить зaпиcывaeмый звyк cпомощью MIC LEVEL (cтp. 102). Oднaко, ecливидeокaмepa подcоeдинeнa к гнeздy AUDIO/VIDEO, нacтpойкy звyкa выполнить нeвозможно.Для болee точного добaвлeния звyкaHaжмитe кнопкy ZERO SET MEMORY нaпyльтe диcтaнционного yпpaвлeния в томмecтe, гдe нyжно зaкончить зaпиcь позжe вpeжимe воcпpоизвeдeния.Bыполнитe пyнкты c 3 по 5. Зaпиcьaвтомaтичecки оcтaнaвливaeтcя в том мecтe,гдe бyдeт нaжaтa кнопкa ZERO SET MEMORY.AUDIO DUBAUDIO DUBDownloaded From VideoCamera-Manual.com Manuals