Sony CCD-TRV21E Operation Manual

4-5. STOP REWINDLoading motor (M903) rotates. [Rotary encoder and cam gear //rotate via gear A. JDrum (M901) rotates.Tension regulator plates 1 and 2 [move in the direction of arrow (_)[in conjunction with the rotationof rotary encoder.TG 1 moves in the direction ofarrow.M slider further moves in thedirection arrow, allowing RVSarm to move in the directionarrow.M slider slides in the directionof arrow, allowing pinch pressplate to move in the directionof arrow.!Pinch roller moves in thedirection of arrow to contactwith capstan shaft.T ratchet and S ratchet move ineach direction of arrows as Mslider moves.* With this operation, tensionregulator band is loosened sothat the regulation of S reelrotation becomes less severe.Brakes for T reel and S reel arereleased, allowing free rotation.Capstan motor (M902) rotatesin the direction of arrow.rPinch roller rotates in thedirection of arrow to start taperunning.LChange gear and relay gearrespectively rotate via timingbelt.Gooseneck gear rotates in thedirection of arrow, allowing therotation of S reel.* This operation winds tapearound S reel.