Sony BVM-F250 Operation Manual

Also see for BVM-F250: Manual Operation manual Operation manual Operation manual

Contents

43Basic Menu OperationsChapter 3 MenuWhen selecting in setting mode1 Using the UP or DOWN button or PHASE knob, selectthe desired item and press the ENTER or Ent button.The cursor moves to the setting value and the monitorenters in setting mode.Display example2 Using the UP or DOWN button or PHASE knob, selectthe setting value.3 Press the ENTER or Ent button.The setting is confirmed and the cursor returns to theitem.When selecting from the setting list1 Using the UP or DOWN button or PHASE knob, selectthe desired item in the setting list.Display example2 Press the ENTER or Ent button.The setting is confirmed and the display returns to themenu of the upper level.Entering numerical values1 Using the UP or DOWN button or PHASE knob, selectthe desired item and press the ENTER or Ent button.The cursor moves to the setting value and the monitorenters in setting mode.Display example2 Select the value in one of the following three ways:• Enter the value directly using the numeric buttonsand press the ENTER or Ent button. (only the itemwhose the value of setting range is over 0)• Select the value using the UP or DOWN button.• Select the value using the PHASE knob.3 Press the ENTER or Ent button.The setting is confirmed and the cursor returns to theitem.Entering characters1 Using the UP or DOWN button or PHASE knob, selectNew Name or the existing name.The “---“ means that one or more characters can beentered in sequence after the existing name.2 Press the ENTER or Ent button.3 Using the UP or DOWN button or PHASE knob, selectthe characters that you wish to enter.Display exampleiChannel Configuration 1/3CH01Format BInput Port: xxxxxInput No: xxxxxScreen Aspect BSync Mode: xxxColor Temp: xxxPicture Preset: xxxxxMatrix BColor Profile BvVSet: ENTER Cancel: MENUCursoriiiParallel Remote 1/51 PinCH: 01---Under ScanOver ScanNative Scan16 : 9H DelayV DelayExternal SyncCombvViChannel Configuration 2/3CH01Marker Preset xxxxxH Shift Offset: xxxChannel Name BNTSC Setup Level:: xxComponent Level: xxxxxBetacam Setup Level:: xxxRGB Range: B1080I/PsF BvVSet: ENTER Cancel: MENUiiChannel NameCH01PROG___EDIT___CAM___VTR___PREV___New Name