Sony BDV-E880 Operating Instructions Manual

Also see for BDV-E880: Instruction & operation manual Installation guide Operating instructions Operating instructions Quick setup guide

54USx [Cinema Conversion Mode][Auto]: Normally select this. The unitautomatically detects whether the material isvideo-based or film-based, and switches to theappropriate conversion method.[Video]: The conversion method suited forvideo-based material will always be selectedregardless of the material.x [Output Video Format][HDMI]: Normally select [Auto]. Select[Original Resolution] to output the resolutionrecorded on the disc. (When the resolution islower than SD resolution, it is scaled up to SDresolution.)[Component Video]: Select the resolution thatsuits your TV.[Video]: Automatically sets the lowestresolution.• If no picture appears when setting [HDMI] or[Component Video] resolution, try another resolutionsetting.• When connecting via the COMPONENT VIDEOOUT jack and [Component Video] is selected, BD-ROM playback of protected content is only supportedat 480i* output resolution (pages 16, 23).* 480i/576i for Mexican and Latin Americanmodels.x [BD/DVD-ROM 1080/24p Output][Auto]: Outputs 1920 × 1080p/24 Hz videosignals only when connecting a 1080/24p-compatible TV using the HDMI (OUT) jack.[Off]: Select this when your TV is notcompatible with 1080/24p video signals.x [YCbCr/RGB (HDMI)][Auto]: Automatically detects the type ofexternal device, and switches to the matchingcolor setting.[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 videosignals.[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 videosignals.[RGB]: Select this when connecting to a devicewith an HDCP-compliant DVI jack.x [HDMI Deep Color Output][Auto]: Normally select this.[16bit], [12bit], [10bit]: Outputs 16bit/12bit/10bit video signals when the connected TV iscompatible with Deep Color.[Off]: Select this when the picture is unstable orcolors appear unnatural.x [Pause Mode] (BD/DVD VIDEO/DVD-R/DVD-RW only)[Auto]: The picture, including subjects thatmove dynamically, is output with no jitter.Normally select this position.[Frame]: The picture, including subjects that donot move dynamically, is output in highresolution.[Audio Settings]x [BD Audio MIX Setting][On]: Outputs the audio obtained by mixing theinteractive audio and secondary audio to theprimary audio.[Off]: Outputs the primary audio only.x [Audio DRC]You can compress the dynamic range of thesound track.[Auto]: Performs playback at the dynamic rangespecified by the disc (BD-ROM only).[On]: The system reproduces the sound trackwith the kind of dynamic range that therecording engineer intended.[Off]: No compression of dynamic range.x [Attenuate - AUDIO]Distortion may occur when you listen to acomponent connected to the AUDIO (AUDIOIN L/R) jacks. You can prevent distortion byreducing the input level on the unit.[On]: Attenuates the input level. The outputlevel is changed.[Off]: Normal input level.