Sony BC-VM10 Operating Instructions Manual

Also see for BC-VM10: Instruction & operation manual Operating instructions User manual

Contents

 21435654-289-308-02(1)Battery ChargerChargeur de BatterieOperating InstructionsMode d’emploiBC-VM10© 2011 Sony CorporationPrinted in ChinaMˎMˎInfoLITHIUMˎˎMˎ1 23 4 CHARGE5612CHARGECHARGE1NP-FM500H NP-FM50 NP-QM71D NP-QM91D175 130 280 46525ˎˎCHARGEˎCHARGEˎ1ˎˎ100V-240V1CHARGE 21.50.15CHARGECHARGECHARGE10 30CHARGE1 CHARGE1AC100 V 240 V 50 Hz/60 Hz 14 VA 20 VA9 WDC8.4 V 750 mA0 4020 +6070 25 9590 gBC-VM10A 1ˎˎ1ˎBC-VM10ˎˎˎThank you for purchasing the Sony Battery charger.Before operating this Battery charger, please read this manual thoroughlyand retain it for future reference.The BC-VM10 battery charger can only be used to charge anˎ“InfoLITHIUM” battery pack (M series).“InfoLITHIUM” battery packs (M series) have theˎ mark.This unit cannot be used to charge a nickel cadmium type or nickelˎmetal hydride type battery pack.“InfoLITHIUM” is a trademark of Sony Corporation.ˎ Identifying the parts1 Battery  mark2 Battery pack3 Charger  mark4 CHARGE lamp5 Power plug6 to wall outlet (wall socket)Owner’s RecordThe model and serial numbers are located on the bottom. Record theserial number in the space provided below. Refer to these numberswhenever you call upon your Sony dealer regarding this product.Model No. BC-VM10 Serial No.To Charge the Battery Pack1 Attach the battery pack.Keeping the battery mark  in the same direction as the chargermark , insert the battery pack until it clicks into place.(See illustration ).2 Pull the power plug up, and then connect it to a wall outlet(wall socket).Always connect the power plug with the prongs at the top(See illustration ).Do not connect the power plug with the prongs at the bottom(See illustration ).The CHARGE lamp (orange) lights up and charging begins.When the CHARGE lamp goes out, normal charging is completed(Normal charge).For a full charge, which allows you to use the battery pack longerthan usual, leave the battery pack in place for approximately anotherone hour (Full charge).To remove the battery packRemove the battery pack by sliding it in the opposite direction to whenyou attached it and lifting it straight out.(Continued on the reverse side.)

/ 2

Related manuals for Sony BC-VM10