SIWAREX WP231Manual, 07/2014, A5E31238908A-02 157Operation requiring verification 1212.1 Preparing for verification12.1.1 Calibration setThe calibration set (available as Accessories (Page 175)) with the following contents isavailable for operation requiring verification:● SecureDisplay software for legal trade display of weight● Ready-to-use project for TIA portal and TP 700 Comfort operator panel● Manual● Information on use of the module in operation requiring verification● EC construction license for the module● Test certificates for the displays● Calibration plate for covering the connection terminals● Templates for ID labels● Tags for ID labels● Self-adhesive markers "M" (green and red)You can prepare the scale verification using the calibration set.12.1.2 Scale designIf you wish to use the scale in operation requiring verification, the design must correspond tothe conditions specified in the construction license. Therefore you should already take thespecifications of the construction license into account when configuring and designing thescale.12.1.3 Installation and parameterization of the main SecureDisplay for legal trade inthe HMIThe SIWAREX SecureDisplay software serves as the legal trade main display of the scale.The software must be installed on the HMI prior to the verification.The DisplayCali.xml file can be used to parameterize the selectable display sizes andpositions on the HMI. You can find a complete description of the software installation in theinformation "SIWAREX SecureDisplay".
