Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

Contents

Teaching in a program8.3 Inserting a blockUniversal172 Operating Manual, 02/2011, 6FC5398-6AP40-0BA0Operating mode or operating area switchoverIf you switch to another operating mode or operating area in teach-in mode, the positionchanges will be canceled and teach-in mode will be cleared.8.3 Inserting a blockYou have the option of traversing the axes and writing the current actual values directly to anew position block.Requirement"AUTO" mode: The program to be edited is selected.Proceed as follows1. Select the "Machine" operating area.2. Press the or key.3. Press the key.4. Press the "Teach prog." softkey.5. Traverse the axes to the relevant position.6. Press the "Teach position" softkey.A new program block with the current actual position values will becreated.