Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 840D sl: Manual Function manual Function manual Function manual Function manual

Contents

Machine the workpiece4.7 Starting execution at a specific pointUniversal100 Operating Manual, 02/2011, 6FC5398-6AP40-0BA0Cascaded searchYou can start another search from the "Search target found" state. The cascading can becontinued any number of times after every search target found.NoteAnother cascaded block search can be started from the stopped program execution only ifthe search target has been found.ReferencesFunction Manual Basic Functions; Block SearchPreconditions1. You have selected the desired program.2. The control system is in the RESET condition.3. The desired search mode is selected.NOTICECollision-free start positionPay attention to a collision-free start position and appropriate active tools and othertechnological values.If necessary, manually approach a collision-free start position. Select the target blockconsidering the selected block search type.Toggling between search pointer and search positionsPress the "Search pointer" softkey again to exit the "Search Pointer"window and return to the "Program" window to define search positions.- OR -Press the "Back" softkey.You have now exited the block search function.See alsoBlock search mode (Page 105)Selecting a program (Page 91)