Siemens SIMATIC V2 Operating Instructions Manual

Also see for SIMATIC IFP V2: Operating instructions Quick install guide

Technical information7.1 Certificates and approvalsIFP V2, IFP V2 PRO, IFP V2 ETH90 Operating Instructions, 03/2023, A5E46641410-AEIEC/UL 61010-2-201The devices meet the requirements and criteria of the IEC/UL 61010 standard, SafetyRequirements for Electrical Equipment for Measurement, Control, and Laboratory Use - Part2-201: Special requirements for control equipment.IEC 61131The devices meet the requirements and criteria of IEC 61131-2, Programmable LogicControllers, Part 2: Operating resource requirements and tests.RCM AUSTRALIA/NEW ZEALANDThis product meets the requirements of EN 61000-6-4 Generic standards – Emission standardfor industrial environments.This product meets the requirements of the standard EN 61000-6-4 Generic standards –Emission standard for industrial environments.KOREAThis product meets the requirements of Korean certification.This product satisfies the requirement of the Korean Certification (KC Mark).이 기기는 업무용(A 급) 전자파 적합기기로서 판매자 또는 사용자는 이 점을 주의하시기바라며 가정 외의 지역에서 사용하는 것을 목적으로 합니다.Note that this device conforms to Limit Class A for emission of radio interference. This devicecan be used in all areas except the residential area.Identification for Eurasion Customs Union• EAC (Eurasian Conformity)• Customs union of Russia, Belarus and Kazakhstan• Declaration of conformity according to Technical Regulations of the Customs Union (TRCU)WEEE label (European Union)Disposal instructions, observe the local regulations and the section "Recycling and disposal(Page 83)".Marine approvalsThe following acceptance tests for marine and offshore applications are planned for thestandard versions, extended versions and PRO devices:• ABS (American Bureau of Shipping)• BV (Bureau Vertias)