Sharp Carousel RK49S27F Installation Instructions Manual

For Sharp Carousel® Built-in KitModels RK49S27F or RK49S30FS = STAINLESSTHIS KIT IS UL APPROVED TO ALLOW CERTAIN MICROWAVEOVENS TO BE INSTALLED ABOVE ANY ELECTRIC WALL OVEN.PLEASE SEE THE OPERATION MANUAL REGARDING APPROVEDBUILT-IN APPLICATIONS.IMPORTANT:This Built-in Kit is designed for and approved only for thoseSharp Microwave Ovens specifying Built-In Kit RK49S27For RK49S30F. Refer to operation manual for approvedmodels.IMPORTANT NOTES TO THE INSTALLER• PLEASE READ THESE INSTRUCTIONS THOROUGHLYBEFORE BEGINNING INSTALLATION.• Observe all governing codes, ordinances, and safetyinstructions.• Be sure to leave these instructions with the consumer.• Be sure to DISCONNECT THE PLUG of the microwaveoven from the electrical outlet before installing the Built-inKit. Remove the Carousel turntable from the oven cavity.• Because the kit includes metal parts, due caution shouldbe used in handling and installation to avoid the possibil-ity of injury.ITEM PART NAME QTYAFRONT FRAMERK49S27F: FDECAB233MRK0RK49S30F: FDECAB235MRK01BBACK FRAMERK49S27F: FDECAB234MRK0RK49S30F: FDECAB236MRK0 1C EXHAUST DUCT ASSEMBLYPDUC-B194MRP0 1D SCREW D: XTSS740P20000 21INSTALLATION INSTRUCTIONSA BDFCEV-cutindicatescenter ofductCLITEM PART NAME QTYE SCREW E: XOPS740P16000 8FAIR DEFLECTORRK49S27F: PREF-B036MRP0RK49S30F: PREF-B037MRP02