Sharp AN-PR1500H Quick Start Manual

Also see for AN-PR1500H: Operation manual

1 AccessoriesTINSEA216AWZZ08D R MW 12 Installing the main unit andthe subwoofer3 Remote control battery installation4 To turn the power on1 Open the battery cover.2 Insert the batteries as shown.3 Close the cover.Use 2 “AA” size batteries (UM/SUM-3, R6, HP-7 or similar).MODELAN-PR1500HHOME CINEMA RACK SYSTEMThis quick Start Guide will help you to correctly install and operate your system.Wire clips x 5Wooden shelf board x 1FM aerial x 1Screw cover x 8Remote control x 1 "AA" size batteries (UM/SUM-3,R6, HP-7 or similar) x 2Top glass cover x 1Cleaning cloth x 1HMDI cable x 11. Pull up both speakers outwards.2. Turn the unit. Place the glass shelf on top of it.3. Place the wooden shelf on top of the screw.4. Cover the screws on the speakers with the screw covers provided.Notes:It is advisable for the top glass cover to be carried by 2 persons.Top glass with sticker on its surface, must face upwards.The maximum load for the top glass cover on the unit is 80 kg.The glass is made of reinforced glass, but dropping pointed objects on itor strongly hitting the surface may cause it to break.The top glass cover and wooden shelf board are not fastened to the unit.Take care when transporting the unit, otherwise these parts may fall offand there is a risk of damage and injury.ProtectionsheetTop glass cover cushionWooden shelfTop glass coverSticker up sideScrew coverAfter checking all the connections have been made correctly, connect theAC power lead to the wall socket.Wall socket(AC 220 - 240 V ~ 50 Hz)

/ 2

Related manuals for Sharp AN-PR1500H