Sharp AN-GR500H Quick Start Manual

1 Accessories2 Installing the glass and the glass protectorTINSEA270AWZZ08G R MW 1MODELAN-GR500HHOME CINEMA RACK SYSTEMThis quick Start Guide will help you to correctly install and operate your system.If you require any advice or assistance regardingyour Sharp product, please visit our web-sitewww.sharp.co.uk/customersupport.aspxCustomers without internet access maytelephone 0870 787 4837 during office hours (or(01) 843 4711 if telephoning from Ireland).Top glass x 1 Bottom glass x 1Remote control x 1 Adjustable nylon band x 3Glass protector x 4AC power lead x 1FM aerial x 1"AA" size battery(UM/SUM-3, R6, HP-7 or similar)x 21. Fix the glass protector to the top glass at each corner.Make sure the "TEMPERED" sticker on top of the glassis facing up.TEMPEREDTEMPEREDTOP VIEWStep 1 Step 2BOTTOM VIEWStep 1 Step 2“TEMPERED” sticker2. Place the top glass on top of the frame.Make sure all the glass protector guide is fitting to the frame hole.TEMPEREDTEMPEREDGlass protectorSubwoofer boxTop glassFrame hole forthe glass protectorto fit in.Bottomglass“TEMPERED” sticker“TEMPERED”sticker3. Place the bottom glass on top of the subwoofer box.Make sure the “TEMPERED” sticker on top of the glass is facingup.Notes:It is advisable for the top glass to be carried by 2 persons.Top glass with sticker on its surface, must face upwards.Metal frame must not be removed to ensure safety.The maximum load for the top glass on the unit is 100 kg.The glasses are made of reinforced glass, but dropping pointedobjects on them or strongly hitting the surface may cause them tobreak.Top and bottom glass are not fastened to the unit. Always takecare when transporting it, otherwise these parts may fall off andthere is a risk of damage and injury.

/ 2

Related manuals for Sharp AN-GR500H