Sharp CD-BA2600H Operation Manual

Also see for CD-BA250H: Operation manual Operation manual Quick guide Service manual Service manual

E-27ENGLISHTape Recording- Recording from the Radio -Recording from the RadioBefore recording:z When recording important selections, make a preliminary test to ensure that thedesired material is properly recorded.z SHARP is not liable for damage or loss of your recording arising from malfunctionof this unit.z The volume and sound controls can be adjusted with no effect on the recordedsignal (Variable Sound Monitor).z For recording, use only normal tapes. Do not use metal or CrO tapes.Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playbackonly.To interrupt recording:Press the REC PAUSE ( ) button.To resume recording, press the / (TAPE 2 ) button.To stop recording:Press the (TAPE ) button.Note:If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.1 Tune in to the desired station. (See page 16.)2 Load a cassette into the TAPE 2 cassette compartment with theside to be recorded on facing you.Wind past the leader of the tape, on which recording cannot be performed.3 Press the REC PAUSE ( )button.Recording will be paused.4 Press the / button on themain unit or the TAPE 2 buttonon the remote control to start re-cording.Erase-prevention tab of cassettetapes:z When recording on a cassette tape,make sure that the erase-preventiontabs are not removed. Cassettes haveremovable tabs that prevent accidentalrecording or erasing.z To protect the recorded sound, removethe tab after recording. Cover the tabhole with adhesive tape to record onthe tape without the tab.Side ATab for side B Tab for side AListening to the Radio (See page 16.)