39Power save settingsGo to “HOME” > “TV Menu” > “Setup” > “ECO”.SetupNo signal offECO picture controlECOEnergy saveCH listMenuNo operation off [Disable][Disable][Off][On]:Back:Enter: SelectNOTE• You can also select “ECO” by pressing ECO.ECOECO picture controlThis function automatically detects the image source anddecreases the power consumption while keeping thebrightness of the image unchanged.NOTE• This function does not work when “AV mode” is set to“DYNAMIC (Fixed)”, “DYNAMIC” or “AUTO”.• This function does not work when “Energy save” is set to“Standard” or “Advanced”.• This function is greyed out in 3D mode.ECOEnergy saveThis function enables you to reduce the backlightbrightness in order to decrease the power consumptionand increase the backlight life span as shown in thefollowing table.ItemStandard Reduces the backlight brightness.Advanced Reduces the backlight brightness morethan “Standard”.OffThe backlight brightness is the samevalue of your settings in the selected “AVmode”.When “Energy save” is set to “Standard” or “Advanced”,“Energy save” status icons appear in the “Picture” menuand channel information windows.NOTE• This function does not work when “AV mode” is set to“DYNAMIC (Fixed)”.ECONo signal offWhen set to “Enable”, the TV will automatically enterstandby mode if there is no signal input for 15 minutes.NOTE• Even if a TV programme finishes, this function may notoperate because of interference from other TV stations orother signals.ECONo operation offYou can set the TV to automatically power off when noTV operation is performed for 30 minutes or 3 hours.NOTE• “Disable” is the factory preset value.ECOSleep timerAllows you to set a time when the TV automaticallyenters standby mode. You can set the time span forentering standby mode after selecting “Change”.NOTE• Select “Off” to cancel the sleep timer.• When the time has been set, countdown automatically starts.• Five minutes before the preset of time expires, the remainingtime displays each minute.Basic adjustment