Sharp Aquos LC-60LE640X Operation Manual

35Picture settingsGo to “HOME” > “TV Menu” > “Setup” > “Picture”.SetupAV modePictureOPC [Off ][STANDARD][STANDARD]CH list:Back:EnterMenuBacklightContrast +40[ +32] 0: SelectNOTE• After selecting a menu such as “AV mode”, “OPC”,“Backlight”, “Contrast”, “Brightness”, “Colour”, “Tint” and“Sharpness”, you can adjust while viewing more of the screenarea by pressing ? to make the menu smaller.• For resetting all adjustment items to factory preset values,press a/b to select “Reset”, press ?, press a/b to select“Yes”, and then press ?.PictureAV mode“AV mode” gives you several viewing options to choosefrom to best match the system environment, whichcan vary due to factors like room-brightness, type ofprogramme watched or the type of image input fromexternal equipment.Press a/b to select the desired mode, and thenpress ?.• You can also switch the mode on the “Picture” and “Audio”menu screen by pressing #.ItemAUTOThe TV automatically sets the appropriateselection from the “AV mode” menu dependingon the lighting conditions and the type ofprogramme watched.STANDARD For a highly defined image in a normally bright room.MOVIE For viewing a movie in a darkened room.GAME For playing of video games.PC*1 For PC.USER Allows you to customise settings as desired.You can set the mode for each input source.DYNAMIC For a clear-cut image emphasising highcontrast for sports viewing.DYNAMIC (Fixed)For a clear-cut image emphasising highcontrast for sports viewing (the “Picture” and“Audio” settings cannot be adjusted).STANDARD (3D)Refer to page 72 for details.MOVIE (3D)GAME (3D)NOTE*1 “PC” is available only when selecting “HDMI1”, “HDMI2”, “HDMI3”,“HDMI4” or “PC” from the “INPUT” menu.• You can select a different “AV mode” item for each inputmode (for example, select “STANDARD” for TV input and“DYNAMIC” for VIDEO input).• If you select “AUTO”, some selections in the “AV mode” menumay not be automatically set.PictureOPCAutomatically adjusts the brightness of the screen.ItemOff The brightness is fixed at the value set in“Backlight”.On Automatically adjusts.On:DisplayDisplays the OPC effect on the screenwhile adjusting the brightness of thescreen.NOTE• When set to “On”, the TV senses the surrounding light andautomatically adjusts the backlight brightness. Make sure noobject obstructs the OPC sensor, which could affect its abilityto sense surrounding light.• When “Backlight” is adjusted, “OPC” is set to “Off”.PicturePicture adjustmentsAdjusts the picture to your preference with the followingpicture settings.Adjustment itemsSelectableitems c (Cursor) d (Cursor)Backlight The screen dims The screenbrightensContrast For less contrast For more contrastBrightness For less brightness For more brightnessColour For less colourintensityFor more colourintensityTint Skin tones becomepurplishSkin tones becomegreenishSharpness For less sharpness For more sharpnessBasic adjustment