Sharp AR-C260P Operation Manual

Also see for AR-C260P: Setup guide Key operator's guide Operation manual

Contents

LOADING PAPER2-8Loading paper in the duplex module/2 x 500 sheet paper drawerUpper tray:The upper tray contains a duplex module that automatically turns print paper over for automatic two-sided printing.Middle and lower paper trays:Up to 500 sheets of paper recommended for colour or SHARP recommended plain paper can be loaded in the middleand lower trays. The method of loading paper is the same as for paper tray 1 in the main unit. See the explanationon page 2-2.Specifications (duplex module/2 x 500 sheet paper drawer)Specifications are subject to change for improvement without notice.NOTEIf the size of paper being loaded is different from the previous size, or is an extra size, or if the paper type is differentfrom the previous type, you must change the paper tray settings in the custom settings. Change the settings asexplained in "Setting the paper type (except for the bypass tray)" on page 2-12 and "Specifying the size when thepaper size is set to "Extra" (except for the bypass tray)" on page 2-13.Name Duplex module/2 x 500 sheet paper drawerPower supply Supplied from the main unitPower consumption 35.6 W or lessDimensions 600 mm (W) x 642 mm (D) x 403 mm (H) (23-5/8" (W) x 25-9/32" (D) x 15-7/8" (H))(not including the adjuster)Weight Approximately 31 kg or 68.2 lbs.Duplex moduleSize of plain paper A3, B4, A4, A4R, B5, B5R, A5, 11" x17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11",8-1/2" x 11"R, 7-1/4" x 10-1/2", 5-1/2" x 8-1/2"Weight of plain paper 64 to 200g/m2 or 17 to 54 lbs.Number of sheets One sheet (single pass type)2 x 500 sheet paper drawerPaper size/weight See "2-trays paper drawer" in the paper tray specifications (next page 2-9)Paper capacity Paper recommended for colour (80 g/m 2 or 20 lbs.): 500 sheets;SHARP standard paper (80 g/m 2 or 20 lbs.): 500 sheets