Sharp AL-1020 Service Manual

Also see for AL-1020: Operation manual

Contents

[8] USER PROGRAMThe conditions of factory setting can be changed according to the use conditions.1. Functions which can be set with the user programFunction Contents Factory settingAuto clear.l When a certain time is passed after completion of copying, this function returns to theinitial state automatically. The time to reach the initial state can be set in the range of30 sec to 120 sec by the unit of 30 sec. This function can be disabled.60 secPre-heat.l When the copier is left unused with the power ON, the power consumption isautomatically reduced to about 40Wh/H (∗ Note).The time to start this function can be set in the range of 30 sec to 90 sec by the unitof 30 sec. This function cannot be disabled. 90 secl When this function is operated, the pre-heat lamp on the operation panel lights up.To return to the initial state, press any key on the operation panel. (When the COPYbutton is pressed, a copy is made after returning to the initial state.)Auto shut offpassing time.l When the copier is left unused with the power ON, the power consumption isautomatically reduced to about 18Wh/H (∗ Note). The time to start this function can beset in the range of 2 min to 120 min. 5 minl When this function is operated, all the lamps except for the pre-heat lamp on theoperation panel turn off.To return to the initial state, press the COPY button.Stream feeding.After completion of copying with the automatic document feeder (SPF), when documentsare set while the SPF indicator is blinking (for about 5 sec), the documents areautomatically fed.SetAuto shut off setting l Used to set or cancel this function. Set∗Note: The power consumption values in pre-heat and auto shut off may be varied depending on the use conditions.2. Change the setting.Example: Changing the time to operate the auto shut off func-tion (Change from 60 sec to 90 sec)1) Press the right and the left exposure adjustment keyssimultaneously to start setting.l Keep pressing the keys for five sec.l Display lamps ( , , blink simultaneously and “--” is displayed on the copy quantity display.2) Select the function code with the 10-digit key (copyquantity set key).l The number of the selected function blinks on the digit of 10on the copy quantity display.l For auto clear, select “1.”l For setting, refer to the following function codes.Function name Function codeAuto clear 1Pre-heat 2Auto shut off passing time 3Stream feeding 4]Auto shut off setting 5[Cancel] If a wrong code is entered, press the clear key andenter the correct function code.3) Press the COPY button.l The number blinking on the digit of 10 of the coyp quantitydisplay is lighted.l The number of the current set code blinks on the digit of 1.4) Select the setting code with 1-digit key (copy quantityset key).l To set to 90 sec, select “3.”l For setting, refer to the following set codes.Functionname Set code Functionname Set code Functionname Set code Functionname Set code Functionname Set codeAuto clear0 (Cancel)Pre-heat0 (30 sec)Auto shutoff0 (2 min)Streamfeeding0 (Cancel)Auto shutoff setting0 (Cancel)1 (30 sec) 1 (60 sec) ∗1 (5 min) ∗1 (Setting) ∗1 (Setting)∗2 (60 sec) ∗2 (90 sec) 2 (15 min)3 (90 sec) 3 (30 min)4 (120 sec) 4 (60 min)5 (120 min)∗ : Factory settingl The number of the selected set code blinks on the digit of 1of the copy quantity display.[Cancel] When a wrong number of the function code is set,press the clear key and perform the procedure againfrom 2.5) Press the COPY button.l The number blinking on the digit of 1 of the copy quantitydisplay is lighted up. This means the setting is completed.[Note] To set another function, press the clear key after com-pletion of this operation and perform the procedurefrom 2.6) Press either one of exposure adjustment keys( or ) to complete the setting.l Display lamps ( , , ) go off and the copy quan-tity display returns to the normal state.AL-12508-1