Menu
Sealey TS02 Instruction Manual
  |
1000MM FLOOR STANDING SHEET METALFOLDERMODEL NO: TS02Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Refer toinstructionmanualTS02 Issue 2 (H) 24/10/22Original Language Version© Jack Sealey LimitedWear eyeprotection Wear protectivegloves1. SAFETY9 Wear approved safety goggles, gloves, and footwear, when operating the folder. Your local Sealey dealer offers a complete range ofsafety equipment.9 Use the tool only for its intended purpose.9 Regularly check all parts of the folder for damaged parts. DO NOT use if any of its components are broken, worn or damaged.9 Use original Sealey spare parts and accessories. Use of non-recommended spare parts may be dangerous and will invalidatewarranty.9 Ensure good footing, wear non slip footwear.8 DO NOT operate this tool while under the influence of drugs, alcohol or other impairing medication.8 DO NOT Allow unqualified persons to operate the metal folder. Keep children away from the tool.2. INTRODUCTIONFloor standing sheet metal folder, fitted with mounting plates. Capable of bending a 1mm rod, of limited length, up to and beyond a 90°angle. The unique patented endless design and removable folding plate allows the user to fold, channel and offset any length of sheetmetal up to 20 Gauge thick, by simply moving the sheet as required after each fold. With adjustable fold plate to help achieve thecleanest fold possible. Ideal for the small garage or restoration operation.3. SPECIFICATIONMODEL NO: ......................................................... TS02Capacity: .......................... 20 Gauge Sheet, Ø1mm Rod1 Top/Base plate clamp2 Adjustment/Positioning Cam3 Removable Folding Plate4 Centre adjustment nut5 Top Plate6 Standing plate7 Folding HandlesWear safetyfootwear |
Related manuals for Sealey TS02
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved