Menu
Sealey DF910.V2 Instructions Manual
  |
instructions forfloor standing metal foldermodel no: df910.V2thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safetY9 Wear approved safety goggles and protective gloves when operating the folder. Your local sealey stockist offers a complete range ofsafety equipment.9 use the tool only for its intended purpose.9 check regularly for damaged parts. do not use if any components are broken, worn or damaged.9 use original sealey spare parts and accessories. use of non-recommended spare parts may be dangerous and will invalidatewarranty.8 do not operate this tool while under the influence of drugs, alcohol or other impairing medication.8 do not allow unqualified persons to operate the metal folder. Keep children away from the tool.2. introductionfloor standing metal folder with 910mm capacity. manually operated and suitable for folding up to 0.8mm sheet.3. specificationmodel no: ............................................................... df910.V2maximum sheet size: ................................................. 910mmmaximum sheet thickness: .......................................... 0.8mmmaximum diameter of steel rod: ..................................... 2mmmaximum width of 2mm strip or 2mm diameter steel rod:................................................................................... 100mmnote: when bending 2mm strip or 2mm diameter steel rod, they must be placed close to one of the set screws.Weight: ........................................................................... 28kg4. contentsunpack the unit and check that all parts are included and not damaged. should you experience a problem contact your supplier immediately.contents: 1x main frame. 2 x cross bars. 1 x folding plate. 1 x foot stand. 1 x Bag of nuts/Bolts consisting of: 2 x set screws (l-shaped),6 x Bolts, 6 x nuts, 6 x Washers.refer toinstructionmanualWear eyeprotection Wearprotectiveglovesdf910.V2| issue:2 (l) 25/10/17Original Language Version© Jack sealey limited |
Related manuals for Sealey 110-6887
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved