9.3.6. Rotate calibrated vernier dial to raise / lower the spindle stop in order to make fine depth adjustment (CCW to decrease, CW to increase).9.3.7. Release the clamp and verify correct depth setting.10. MAINTENANCE WARNING! Always ensure that the battery is removed before commencing any maintenance.10.1. Check the safety guard is situated correctly and not broken.10.2. To prolong the useful life of the router always clean it thoroughly after use and protect bits with a rust preventative.8 DO NOT clean with any solvents as they may attack the material. Clean the router with a dry cloth and remove sawdust from ventilationslots.fig.14Original Language Version© Jack Sealey Limitedfig.11 fig.12 fig.13CP20VTR Issue 1 15/02/2023Features that enable depth of cut to beset (see section 9.3).

Sealey SV20 Series Manual

Product

Learn More

Legal