instructions forelectronic fire proof safe450 x 380 x 305mmmodel no: scfs04thank you for purchasing a sealey product. manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. safetY WarninG! this safe is heavy (33.5kg) and care should be exercised in transit and handling to ensure that no one is injured.8 Do not drill holes in the casing for fixing purposes, this could undermine fire resistance. This is a free standing safe.8 Do not install in areas where damp and condensation may be present, underground or cellars for example. WarninG! The warnings, cautions and instructions referred to in this instruction manual cannot cover all possible conditions andsituations that may occur. It must be understood that common sense and caution are factors which cannot be built into this product,but must be applied by the operator.2. introDuctionHeavy-duty *ABS shell with four bolt door locking mechanism. Dual wall filled with **cellular concrete for fire resistance and thermal insulation.Electronic panel with LCD screen, accepts thousands of 6 digit codes. •Also supplied with two emergency override keys. Offers up to one hour fireresistance with UL approval.• Keep the cabinet key and any record of the code separate from the cabinet and unidentified.* ABS Flame Retardant with UL 94 VO High Classification for strength and impact resistance.** Cellular concrete is a non-flammable solid building material which belongs to building material category A1, offering a shield againstheat in the event of a fire.3. specificationmodel no: ..................................................................SCFS04external size (W x d x H): .......................450 x 380 x 190mminternal size (W x d x H): ........................340 x 245 x 190mmWall /door thickness: ............................................... 55/82mmWeight: ........................................................................ 33.5kg4. installation4.1. Consideration should be given to the placing of the safe to ensure that it is placed in a discreet location and will not be easily found byintruders.sCFS04| Issue 3 (L) 20/04/17Original Language Version© Jack Sealey Limitedrefer toinstructionmanualred buttonBattery compartmentdepress tab and liftoff cover.fig.1 fig.2