Sealey SCFS01.V2 Instructions Manual

instructions forELECTRONIC COMBINATION FIREPROOF SAFESmodel no’s: SCFS01.V2, SCFS03.V2Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,and properly maintained, give you years of trouble free performance.IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USETHE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/ORPERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.1. SAFETY WARNING! these safes are heavy and care should be exercised in transit and handling to ensure that no one is injured. WARNING! Due to the fireproof concrete infill material both safes are a 2 man lift both for transit and installation.88 88 DO NOT install in areas where damp and condensation are present.2. INTRODuCTIONHeavy duty multi-walled fireproof safes injected with fireproof foaming concrete offering up to one hour fire resistance with UL approval. Finishedwith a corrosion resistant powder coating. Double safety lock requires both electronic access code and key to open the locking mechanism. Alsoincludes one removable shelf. (SCFS03 one tray). Batteries included.3. SPECIFICATIONmodel no: ............................................................ SCFS01.V2external dimensions (W x D x H): ........... 400 x 330 x 330mminternal dimensions (W x D x H): .............315 x 230 x 220mmthickness wall/door:................................................ 40/75mmshelf quantity: ...................................................................... 14. INSTALLATION4.1. Careful consideration should be given to the location of the safe to ensure that it is discreetly placed and not easily found by anyintruders.4.2. Appoint key holders for the two keys provided and discuss security arrangements for the safekeeping and availability of the keys.5. OPERATIONp5.1. Refer to fig.2 for function and position of the two sets of keys.5.2. First time opening of safe5.2.1. Fit batteries. Use keys to open door to insert batteries into thecompartment on the back of the door, see fig.1.5.3. Factory code setting: Personal code “1234” and Master code“123456”.5.4. Personal code setting:5.4.1. Option 1:Press RESET button once, the display shows “------” whichmeans that you can set a personal code.Input a 1-8 digital code and press “#” to confirm, the displayshows “IN” which means that the Personal Code set hasbeen successful.5.4.2. Option 2:Open the door with the personal code. When the displayshows “OPEN” and the LCD back light is blue,press “*” key, the system is in ‘changing personal mode state’and shows “------”.Now input a new 1-8 digit personal code. Press “#” to confirm.5.5. Master code setting:5.5.1. Option 1:Press “#” key and the display will illuminate and show “------”.Press “0” twice and press the RESET button, the display willshow “------” which means that the Master code can be set.Input a 1-8 digit code, then press “#” to confirm, the displayshows “IN” which means the Master code has been successful.sCFS01.V2, SCFS03.V2 | Issue:2(5) 01/03/18Original Language Version© Jack Sealey Limitedrefer toinstructionmanualmodel no: ............................................................ SCFS03.V2external dimensions (W x D x H): ........... 355 x 390 x 515mminternal dimensions (W x D x H): .............255 x 245 x 310mmthickness wall/door:................................................ 55/80mmtray quantity: ....................................................................... 1Fig.1Fig.2

/ 2

Related manuals for Sealey SCFS01.V2