Sealey AP200.V3 Manual

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCTCORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILLINVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to theseinstructions and maintained properly, give you years of trouble free performance.Refer to InstructionManualAP200.V3 Issue: 2 (1,4) 18/12/23Original Language Version© Jack Sealey Limited1. SAFETY WARNING! Thoroughly read and understand the provided product manual before attempting to use this product. WARNING! Use workstation on level and solid ground, preferably concrete. WARNING! DO NOT stand on this product, or attempt to ride on it. You may fall, which could lead to personal injury. WARNING! DO NOT alter this product in any way. Any added material or components may imbalance the tray, which could lead toproperty damage and personal injury. WARNING! Be mindful of sharp edges/welds while assembling, and operating workstation. Always wear safety gloves and appropriatesafety equipment. WARNING! DO NOT exceed weight capacity (see product specifications). This could lead to product failure and personal injury whileworking with tools and equipment.9 Locate workstation in a suitable working area.9 Keep the work area clean, uncluttered and ensure there is adequate lighting.9 Keep the workstation clean and tidy in accordance with good workshop practice.9 Keep children and unauthorised persons away from working area.9 Ensure that fixings have been securely tightened before use.8 DO NOT use the workstation for any purpose other than that for which it is designed.8 DO NOT attempt to transport heavy loads on the workstation.2. INTRODUCTIONTable is fully adjustable in height. Features four compartments, one large for main workpiece and three equal sized smaller sections foraccessories. EVA lining on the table helps prevent damage to the unit and workpiece. Suitable for use in workshops and warehouses.Supplied with four castor wheels.3. SPECIFICATION4. ASSEMBLY4.1. Remove all contents from the outer box and reference the parts list to ensure that all parts are present.4.2. Fasten Castor wheels (I & J) to each Wheel Frame (H & F). Ensure that the Castor wheels (I & J) is fully inserted into each square sloton the Wheel Frame (H & F).4.3. Insert Large Plastic inserts (G) into the end caps of the Extended Wheel Frame (H) and Wheel Frame (F).4.4. Align the base plate of the Lower Table Mounting Column (K) to the holes on the wheel Frame (F). Fasten securely using the Hex HeadSet Screw M8 x 16 Zinc (L).4.5. Slide the Upper Table Mounting Column (D) into the Lower Table Mounting Column (K). Fasten together using the Hex Head Set ScrewM8 x 16 Zinc (L).4.6. Lay the Table (A) upside down, onto a clean protected surface. Attach the mounting bracket of the Upper Table Mounting Column (D) tothe bottom of the Table (A) using the Hex Head Set Screw M8 x 16 Zinc (L).4.7. Slide the completed Upper Assembly into the top of the Lower Table Mounting Column (K), and secure at the desired height using theHeight Adjustment Knob (E).4.8. Place Rubber Mats (B & M) into Table (A).9 Refer to fig.1 over leaf and attached parts diagram.50KG CAPACITY ADJUSTABLE-HEIGHT MOBILEWORKSTATIONMODEL NO: AP200.V3Model no: AP200.V3Minimum Height: 875mmMaximum Height: 1235mmTable Size (W x D): 745 x 512mmCapacity: 50kg

/ 2

Related manuals for Sealey AP200.V3