Sanyo FW50C85T Owner's Manual

Sanyo FW50C85T Owner's Manual Manual pdf 33 page image

LanguageYou can set the language for the On-screen display.1 Use H I to Select Language, then press OK.InstallationFeaturesSoundPictureRestore default settingsPreferencesLanguageEspañolFrançaisEnglish2 Use H I to Select English, Español or Français, then press OK.Note(s)● If you need the English menu instead of the Spanish or French menu’s, press Z.Use J K to Select Configuración or Configuration, then press OK.Use H I J K to Select Ajustes de TV or Réglages de la télévision, then press OK.Use H I to Sselect Instalación or Installation, then press OK.Use H I to Select Idioma or Langue, then press OK.Use H I to Select English, then press OK.Press Z to exit the Home menu.PreferencesYou can set the unit to reduce the power consumption or adjust thebacklight brightness in Location setting.fun-Link (HDMI CEC) allows you to operate your connected HDMI-CECdevice.Setting your location to homeChoosing Home gives you full flexibility to change predefined settingsfor picture and sound.1 Use H I to Select Preferences, then press OK.2 Use H I to Select Location, then press OK.E-stickerTV placementfun-Link (HDMI CEC)LocationHDMI modeHomeRetailRestore default settingsPreferencesLanguage3 Use H I to Select Home, then press OK.Retail The Unit will be set up with predefined settings forretail displays. In this setting, you can set thebacklight brighter.HomeThe Unit is set to maximize the energy efficiency forHome setting and it can be adjusted through a choiceof Picture and Sound quality selections according toyour preference.Note(s)● You must set Home in the Menu. Otherwise, personalized Picture and Sound Settings willNot Be Memorized after the Unit goes into Standby Mode.HDMI modeIf there are issues with picture/color and/or sound when connecting anexternal device using the HDMI port, please try switching the HDMImode following the instructions below.1 Press Z and use J K to Select Setup, then press OK.2 Use H I J K to Select TV settings, then press OK.3 Use H I to Select Installation, then press OK.4 Use H I to Select Preferences, then press OK.5 Use H I to Select HDMI mode, then press OK.6 Use H I to Select HDMI1, HDMI2 or HDMI3, then press OK.7 Use H I to Select Legacy (Compatibility), then press OK. If thisdoes not solve the problem, then try Normal.● When switching the HDMI configuration (Legacy Û Normal), thescreen will black out for a moment, then come back on.Note(s)● The HDMI connector with HDMI mode set to Legacy (Compatibility) supports up to UHD30P, while The HDMI connector with HDMI mode set to Normal supports up to UHD 60P.● Switching the HDMI mode between Normal and Legacy (Compatibility) may cause lossof HDMI CEC functionality in certain cases.TV placementTo apply the best settings for your TV, select wall mount or standmount.1 Use H I to Select Preferences, then press OK.2 Use H I to Select TV placement, then press OK.3 Use H I to Select Wall mounted or On a TV stand, then pressOK.E-stickerWhen you set Location to Retail, E-sticker (Electronic Sticker) isdisplayed. E-sticker can be Turned Off using procedure below.1 Use H I to Select Preferences, then press OK.2 Use H I to Select E-sticker, then press OK.3 Use H I to Select Off, then press OK.33 .EnglishContinued on next page.