Sanav TRACKSTARIII User Manual

Contents

Sanav TRACKSTARIII User Manual Manual pdf 24 page image

245.2 ParkingMessage Example$Username,45,GSM:46697,BTS:2906F250,Towed (Still),Move 450m NE,Now(Previously 17:26), At positionof-$GPRMC,095838.000,A,2458.9733,N,12125.6583,E,0.41,79.21,220905,,*30The table 5.2.1 is describing the meaning of each segment in the message above.Text Shown In SMS Description$ Start sign.Username Default ID of TRACKSTARIII.45 A encrypted code for PDA TrackGSM:46697 The GSM Provider ID.In this case, 46697 is the GSM provider ID. This ID should be changedautomatically once you change the GSM service provider.BTS:2906F250 The GSM Station ID It indicates the BTS code of current GSM station used for transmission. In thiscase, 2906F250 is the Station ID.Towed (Still) After you press the “Park” key, while the carrier’s position is away from its parkingspace over 100m, TRACKSTARIII will auto report “towed” message to the firstpredefined phone number, PH-01; otherwise it will report “still”.Move 450m NE This segment indicates the movement of TRACKSTARIII. TRACKSTARIII will calculate the distance between the original position ofyour car and current position to show the moved distance and on-goingdirection.Now(Previously 17:26) This segment indicates GPS data validity of TRACKSTARIII. If this segment is “Now”, it indicates GPS fix is in real time. If this segment is in 24 hour time format such as “Previously 17:26”, itindicates TRACKSTARIII currently cannot receive enough GPS signal to fixposition so as to send the last GPRMC data at that time (it will be transformedto local time directly).$GPRMC GPS NMEA information from GPS receiver, including UTC time, latitude,longitude, speed, true course, etc. See Chapter 6 for detail.* End sign.Table 5.2.1Interval of Parking SMS MessageAfter TRACKSTARIII detects your car or asset is towed/moved, it will send SMS messages to only to the firstpredefined phone number, PH-01 so as to remind the user. Its transmitting time interval is 2minutes and it willsend 20 reports in total. Check Chapter 4.2 for more PH-01 setup detail.