Sanav TRACKSTARIII User Manual

Contents

Sanav TRACKSTARIII User Manual Manual pdf 10 page image

10Chapter 2 Getting Started1. Charge the battery for 3 hours by using the wall charger (page7) or cigar charger (page8) provided if youwould like to run the TRACKSTARIII by battery embedded.2. Please prepare a valid GSM SIM Card.3. Insert the SIM card by following the procedure shown in SIM Card Slot (page8).4. Place the TRACKSTARIII upward and let it has a clear sky vision. Switch the power on.5. You also can run or evaluate the TRACKSTARIII while it is charging.6. The Red LED will be blinking while TRACKSTARIII is searching the GSM network.7. After 10 ~ 20 flashes, the red LED should stay still. GSM network connection is successful. If you have anydifficulties, please refer to the FAQ in the last page.8. For the first-time operation of TRACKSTARIII, the Blue LED will light on and keep still within 90 seconds.That means the TRACKSTARIII gets the GPS fixed. If you have any difficulties, please refer to the FAQ thelast page9. You may start tracking!