Samsung VC240 Quick Setup Manual

Also see for SyncMaster VC240: Reference guide Quick start guide User guide Quick setup guide User manual

Unpack the product and check if all of the followingcontents have been included. Store the packagingbox in case you need to move the product at alater stage.A 30-second stand-by time is required after turningthe product on.Package ContentsInstalling the stand1PXFSFECZQuick Setup GuideTurn the stand in the directionindicated by the arrow.Caution: Do not remove the stopperpin before completely installingthe stand’s base. Otherwise it maycause physical injury.Turn the connecting screw at thebottom of the stand fully so that itis completely secured.After installation of the base iscomplete, stand the product up.• Remove the stopper pin.• Adjust the height of the screento your specifications.Make sure that the stand hasbeen properly turned in the rightdirection.Push the base into the product’sstand in the direction indicated bythe arrow.9K>8VWaZ EdlZg8dgY9"hjW8VWaZLVggVcin8VgYCdiVkV^aVWaZ^cVaaadXVi^dchJhZghFj^X`HZije7ViiZg^Zh666M'CdiVkV^aVWaZ^cVaaadXVi^dch ;Zgg^iZ8dgZ[dgA6CXVWaZGZbdiZ8dcigdaHiZgZd8VWaZ 8aZVc^c\8adi]A6C8VWaZ142536Before attaching the stand, place a soft cloth on a flat, stable surface, and then place the product onto the cloth so that the screenis facing downwards.Caution: 1. When placing the product on a flat surface, you can damage the projection on the camera.2. To prevent damage, place the monitor down gently & carefully.3. Do not remove the stopper pin before installing the base.BN68-02401C-01

/ 2

Related manuals for Samsung SyncMaster VC240