Menu
Samsung SSA-R2000V User Manual
                  |
English _ 11INSTALLATION AND EXTERNAL CONNECTIONSSA-R2000VEXTERNAL CONNECTIONWIRING DIAGRAMCategory Cable WiringPower Supply UnitConnect the DC+12V to the red line.Connect GND to the black line.Wiegand ConnectionConnect the green line of the product to the Wiegand D0 input port of the controller.Connect the white line of the product to the Wiegand D1 input port of the controller.LED ControlEnables you to turn on or off the LED indicators.To control the green indicator, connect the yellow line; to control the orange indicator, connect the blue linewith white stripes, to the output port of the controller. (see page 12)Buzzer Control Enables you to turn on or off the buzzer.To control the buzzer, connect the blue line to the controller’s output (relay). (see page 12)Tamper Control Connect the COM port (Pink line) of the product’s tamper switch to GND; connect the NC port (Light yellow)of the tamper switch to the input port of the controller.RS-232 Connection Connect to the COM port of the PC. (Connect pin 2 of the DB-9 connector to the purple line; connect theorange line to pin #5 of the DB-9 connector)Wiegand Data 0 OutWiegand Data 1 OutPCPOWERCONTROLLERSSA-R2000VRed BlackDC +12V GNDRS-232(GND)RS-232(TX)PurpleOrangeTamper Switch Out(NC)Tamper Switch Out(COM)Buzzer Control InLED Control In(Green)LED Control In(Orange)GreenWhiteLight yellowPinkBlueYellowGray |
Related manuals for Samsung SSA-R2000V
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved