ŝ132ŞCamera does not take images when pressing the Shutter buttonϛThere is insufficient memory capacity.ƍ Delete unnecessary image filesϛThe memory card has not been formattedƍ Format the memory card (p.116)ϛThe memory card is exhaustedƍ Insert a new memory cardϛThe camera’s power is offƍ Turn the camera power onϛThe batteries are exhaustedƍ Insert charged battery.The camera suddenly stops working while in useϛThe camera was stopped due to a malfunctionƍ Remove/ re-insert battery and switch the camera onThe images are unclearϛA picture was taken the subject without setting an appropriate macro modeƍ Select an appropriate macro mode to take a clear image.ϛTaking a picture beyond the flash rangeƍ Take a picture within the flash rangeϛThe lens is smudged or dirtyƍ Clean the lensϛThe focus is not correct in the manual focus modeƍ Set the correct focus in the manual focus mode.ϛThere was camera shake when using a high rate zoom.ƍ Use a tripod when using a high rate zoom.The flash does not fireϛFlash off mode has been selectedƍ Dis-engage flash off modeϛThe camera mode can’t use the flashƍ Refer to the FLASH instruction (p.57~60)Incorrect date and time is displayedϛThe date and time have been set incorrectly or the camera has adopted the default settingsƍ Reset the date and time correctlyBefore contacting a service centre
