ŝ121Şƈ The Movie output signal from the camera can be NTSC or PAL.Your choice of output will be governed by the type of device (monitor or TV, etc.) to which thecamera is connected. PAL mode can support only BDGHI.ƃ How to set the video out type1. Press the Menu button and select the [ ] menu tab.2. Press the Right button and select the [Video Out] menuby pressing the Up/ Down button.3. Press the Right button and select a desired LCDby pressing the Up/ Down button.- [Video Out] sub menu : NTSC, PAL4. Press the OK button to set the setting.ƃ NTSC : U.S.A, Canada, Japan, South Korea, Taiwan, Mexico.ƃ PAL : Australia, Austria, Belgium, China, Denmark, Finland, Germany, U.K., Holland,Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain, Sweden, Switzerland,Thailand, Norway.ƃ When using a TV as an external monitor, you will need to select the external or AVchannel of the TV.ƃ There will be a digital noise on the external monitor, but it is not a malfunction.ƃ If the image is not in the centre of the screen, use the TV controls to centre it.ƃ When the camera is connected to an external monitor, the menu will be visible on theexternal monitor and the menu functions are the same as those indicated on the LCD.INFORMATIONƃ Connecting to an external monitorIn RECORDING/ PLAY mode, you canview the stored still images or movie clipsby connecting the camera to an externalmonitor via the AV cable. When thecamera is connected to an externalmonitor, the LCD monitor will be turnedoff automatically.Yellow Colour-VideoWhite Colour-Voice (Stereo)ImprintSoundBrightnessVideo OutQuick ViewAuto RotatingUSBNTSCPALSelecting Video out type
