Samsung PM55F-BC User Manual

Also see for PM32F-BC: Quick setup guide User manual User manual Quick setup guide Quick setup guide

66Chapter 5. MenuManual Network Setup (Wireless)Offices may use static IP addresses.If this is the case, ask the network administrator for the IP address, subnet mask,gateway and DNS server address. Enter these values manually.Getting the Network Connection ValuesTo view the Network connection values on most Windows computers, follow thesesteps.1 Right click the Network icon on the bottom right of the screen.2 In the pop-up menu that appears, click Status.3 On the dialog that appears, click the Support tab.4 On the Support Tab, click the Details button. The Network connection values aredisplayed.How to set up manually1 Press the MENU button on the remote control.2 Select Network - Open Network Settings.3 Select Wireless.‒ The network function searches for available wireless networks. When done, itdisplays a list of the available networks.4 Select Stop. The verification process stops.5 Select Add Network.6 Enter the SSID of the network and select Done.7 Select the Security type and select OK. If you select Open, move to step 10.8 If the router has security, enter the password. (Security key or PIN)9 When done, use the  button to move the cursor to Done, and then press . Thenetwork test screen appears and then the verification process starts.10 When the connection has been verified, select OK.WPS(PBC)How to set up using WPS(PBC)If your router has a WPS(PBC) button, follow these steps.1 Press the MENU button on the remote control.2 Select Network - Open Network Settings.3 Select Wireless.‒ The network function searches for available wireless networks. When done, itdisplays a list of the available networks.4 Select Stop. The verification process stops.5 Select Use WPS and press .6 Press the WPS(PBC) button on your router within 2 minutes. Your productautomatically acquires all the network setting values it needs and connects to yournetwork.7 The network connection screen appears, and network setup is done.