19Chapter 2. Device setupWall mount installationPreparing before installing wall mount1To install a wall mount from another manufacturer, use the Holder-Ring ( 1 ).Installing the wall mount• The wall mount kit (sold separately) allows you to mount the product on the wall.• For detailed information on installing the wall mount, see the instructions providedwith the wall mount.• We recommend you contact a technician for assistance when installing the wallmount bracket.WARNING• Samsung Electronics is not responsible for any damage to the product or injuryto yourself or others if you elect to install the wall mount on your own.Wall mount kit specifications (VESA)Install your wall mount on a solid wall perpendicular to the floor. Before attaching thewall mount to surfaces other than plaster board, please contact your nearest dealerfor additional information.WARNINGIf you install the product on a slanted wall, it may fall and result in severe personalinjury.AB• Samsung wall mount kits contain a detailed installation manual and all partsnecessary for assembly are provided.• For wall mounts that do not comply with the VESA standard screw specifications, thelength of the screws may differ depending on the wall mount specifications.• Standard dimensions for wall mount kits are shown in the table below.Unit: mmModel name VESA screw hole specs (A * B) inmillimetersStandard screw QuantityPM32F-BC 200.0 mm * 200.0 mm M8 4PM55F-BC 400.0 mm * 400.0 mm