Samsung PM55F-BC User Manual

Also see for PM32F-BC: Quick setup guide User manual User manual Quick setup guide Quick setup guide

65Chapter 5. MenuNetwork Setting (Wireless)Connecting to a Wireless NetworkWireless IP sharer(router having DHCPserver)LAN port on thewallLAN cableSamsung recommends using IEEE 802.11n. When you play video over a networkconnection, the video may not play smoothly.• Select a channel for the wireless IP sharer that is not currently being used. If thechannel set for the wireless IP sharer is currently being used by another devicenearby, this will result in interference and communication failure.• Your product supports only the following wireless network security protocols.If you select the Pure High-throughput (Greenfield) 802.11n mode and theEncryption type is set to WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wirelessrouter, Samsung products will not support a connection in compliance with new Wi-Fi certification specifications.• If your wireless router supports WPS (Wi-Fi Protected Setup), you can connect tothe network via PBC (Push Button Configuration) or PIN (Personal IdentificationNumber). WPS will automatically configure the SSID and WPA key in either mode.• Connection Methods: You can setup the wireless network connection in three ways.Auto Setup (Using the Auto Network Search function), Manual Setup, WPS(PBC)Automatic Network Setup (Wireless)Most wireless networks have an optional security system that requires devicesthat access the network to transmit an encrypted security code called an Access orSecurity Key. The Security Key is based on a Pass Phrase, typically a word or a seriesof letters and numbers of a specified length you were asked to enter when you set upsecurity for your wireless network. If you use this method of setting up the networkconnection, and have a Security Key for your wireless network, you will have to enterthe Pass Phrase during the the automatic or manual setup process.How to set up automatically1 Press the MENU button on the remote control.2 Select Network - Open Network Settings.3 Select Wireless.‒ The network function searches for available wireless networks. When done, itdisplays a list of the available networks.4 In the list of networks, press the  or  button to select a network, and then press.‒ If the desired wireless router does not appear, select Refresh to search again.‒ If the router cannot be found after retrying, select the Stop button. The AddNetwork button appears and you can set the network manually.5 If the Enter password screen appears, go to step 6. If you select a wireless routerthat does not have security, go to step 8.6 If the router has security, enter the password. (Security key or PIN).7 When done, use the  button to move the cursor to Done, and then press . Thenetwork test screen appears and then the verification process starts.8 When the connection has been verified, select OK.