Samsung OfficeServ500 Installation Manual

Also see for OfficeServ500: Programming manual General description

Contents

2-1Chapter 2 Installing Single and MultipleCabinet ConfigurationsUnpacking and InspectionThe OfficeServ500 can be configured in several ways: ‘S’ and ‘M’ systems are configured as a singlecabinet only; ‘L’ systems can have one, two or three cabinets.A single cabinet system may be wall, floor, or rack mounted while multiple cabinets systems may onlybe floor or rack mounted. Do not attempt to wall mount a multiple cabinet system.All system cabinets are identical. When unpacking the cabinet(s), inspect for signs of physical damage.If any damage is detected, do not attempt installation—contact your supplier instead.Check to see that each cabinet carton includes the following items:y Top covery Left and right side coversy Front covery Cabinet leg mounting kity AC power and DC power cablesCheck that all additional hardware and software is available for installation.y Floor mounting equipment (legs or castors), if required.y Cards required to make the system functional (i.e., power supply, central processor, station andtrunk cards).