Samsung OfficeServ 7200 User Instructions

Also see for DS 5000 Series: User guide User instruction User guide User manual Quick reference guide

Contents

ENBLOCK DIALINGThis option allows you to dial digits then press the SEND button to make the call(like a cellphone).• While the handset on-hook press TRANSFER then dial 110.• Dial 161 to turn Enblock Dialing ON or 160 to turn it off.• Press TRANSFER to store your selection.CONFIGURE MOBILE EXTENSIONS (MOBEX)This feature allows you to configure options for any Mobile Extension (MOBEX)ports that are assigned to you by your telephone system administrator. You canturn a port on or off; set the telephone number for the port; or set the caller ID youwill be calling in from. The caller ID field has no effect unless you have beenauthorized as an Executive MOBEX user. Check with your telephone systemadministrator for further details on your specific system configuration.To set the phone number a MOBEX port can reach you on:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 0 to select the telephone option.• Dial the number of a C.O. line to use when making calls to this MOBEX port.• Dial the phone number you can be reached at by users calling this MOBEXport.• Press TRANSFER to store your selection and exit programming.To set the caller ID of the location you will be calling in from:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 1 to select the caller ID option.• Dial the phone number you will be calling in from.• Press TRANSFER to store your selection and exit programming.48To turn a MOBEX port ON or OFF:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 2 to select the activation status option.• Dial 0 to turn the port on, dial 1 to turn the port off.• Press TRANSFER to store your selection and exit programming.To turn aMOBEX port ON or OFF:• Press TRANSFER and then dial 126.• Dial your station pass code.• Dial the number of the port you wish to configure (1-5) (you may also use theVolume Up and Volume Down keys to select a port and press the right softkey to confirm).• Dial 2 to select the activation status option.• Dial 0 to turn the port on, dial 1 to turn the port off.• Press TRANSFER to store your selection and exit programming.49