Menu
Samsung OfficeServ 100 Series User Manual
Also see for OFFICESERV 500 Series: Service manualSystem administration guideQuick setup guideQuick setup guideQuick setup guide
                                                                                            |
CALL PROGRESS DISPLAYSDuring everyday call handling, your keyset display will provide information that ishelpful and in some cases invaluable. Displays like [CALL FROM 203], [TRANSFERTO 202], [701: RINGING], [TRANSFER FM 203], [708 busy], [Camp on to 204], [Recallfrom 204], [Call for 501], [message frm 204] and [FWD ALL to 204] keep you in-formed of what is happening and where you are. In some conditions you areprompted to take an action and in other cases you receive directory information.DISPLAY NUMBER DIALEDDisplay keysets begin showing digits as they are dialed. They will stay in the dis-play until the call duration timer comes on automatically or the TIMER button ispressed. If the call duration timer is not used, the number dialed will be displayeduntil the call is released, transferred or put on hold.CALL DURATION TIMERThe system can be set to automatically time outside calls. A few seconds after youdial a telephone number, the timer appears in the display. It appears immediatelyfor incoming calls. The call timer continues for the duration of the call. Call dura-tion times are displayed in minutes and seconds. If a call lasts longer than 60 min-utes, the timer restarts.You can press the TIMER key to manually begin timing a call. Press it again to stoptiming. If you press it while the automatic timer is on, the call duration time isrestarted.AUTO TIMERDisplay keyset users may have the timer automatically start when they answerincoming calls or after a short delay on an outgoing call.• With the handset on-hook, press TRANSFER and then dial 119.• Dial 41 to turn the auto timer on or 40 to turn it off.• Press TRANSFER to store your selection.TIMER FUNCTIONDisplay keyset users may use this feature as a simple stopwatch.• When the keyset is idle, press the TIMER button to start timing.• Press the TIMER button again to stop timing.• Read the elapsed time in the display.• Lift the handset and replace it. The display will return to date and time.49 |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved