Menu
Samsung OfficeServ 100 Series User Manual
Also see for OFFICESERV 500 Series: Service manualSystem administration guideQuick setup guideQuick setup guideQuick setup guide
                                                                                            |
14OUTSIDE CALLSMAKING AN OUTSIDE CALL• Lift the handset and press an idle outside line button, line group button or diala line access code to receive dial tone—OR—press an idle outside line button,line group button or dial a line access code to receive dial tone through thespeaker—OR—press SPEAKER, receive intercom dial tone and dial a lineaccess code.• Dial the telephone number.• Finish the call by replacing the handset or pressing the ANS/RLS key.NOTE: You will receive No More Calls tone when you attempt to make a call andthere is no key available for that line.• If Least Cost Routing is enabled on your phone system, this button may belabeled LCR or accessed by dialing an access code (usually 9).• If your system is programmed to require an authorization code before makinga call, dial plus a valid code before selecting a C.O. line.• If your system is programmed to require an account code before making acall, press the ACC button or dial 47 plus a valid bin number, press the ACCbutton again, or , and then select a C.O. line. See Account Codes for more infor-mation.For more information on authorization and account codes, see your systemadministrator.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before dialing.ANSWERING AN OUTSIDE CALL• Lift the handset and you are automatically connected to the ringing call.See Ring Preference under Customizing Your Keyset—OR—press the ANS/RLSkey to automatically answer on the speakerphone.NOTE: If a call is flashing at your keyset but not ringing, you must press the flash-ing button to answer.UNIVERSAL ANSWEROutside lines may be programmed to ring a general alerting device. To answercalls ringing this device, dial 67 or press the UA key.This device can operate in anyone of the six different ring plans.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER key before dialing. |
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved