Samsung OFFICESERV 7100 Description

Also see for OFFICESERV 7100: Quick guide System administration guide User guide User manual User guide

Contents

PROGRAMMABLE LINE PRIVACYEach outside line can be programmed to ignore the automatic line privacy. This allows up to four other par-ties to join your conversation by pressing the line button. This is similar to 1A2 key telephone operation.PROGRAMMABLE TIMERSThere are over 50 programmable system timers to allow each installation to be customized to best fit the enduser’s application.RECALLSCalls put on hold, transferred or camped-on to any station will recall to the originating station if not answeredwithin a programmable time. A recall that goes unanswered for the duration of the attendant recall timer willrecall to the system operator group. Hold, transfer, camp-on and attendant recalls have individual program-mable timers. Calls recalling to buttons with tri-colored LEDs will flash amber.RECALL TO OPERATORThis function will allow the call to recall the operator instead of to the transferring station after the transferrecall time expires.REDIAL REVIEWThe Redial Review feature allows a review of the last number before dialing or allows access to the Call LogBlocks if assigned.These Call Log Blocks record the last ten (10) numbers dialed.When the LNR key is pressedthe last number dialed is displayed.The log can then be scrolled using the Volume (Up/Down) keys and a pre-viously dialed number can be selected.REMOTE PROGRAMMING—PCRemote programming allows the technician to access the system database from a remote location for thepurpose of making changes to the customer data.The Installation Tool is the proprietary, programming appli-cation used to access and manipulate the telephone system database. The Installation Tool connects to thesystem via LAN, WAN or serial modem connection to the MP10a. This application runs on a PC (Windows2000 or higher). The embedded voice mail system is programmed remotely using Internet Explorer 6.0 orhigher to access the embedded Web Manager application.RING MODESTime Based Routing - PlansEach C.O. line can be programmed to ring at any station or station group. Each line can be assigned a ringdestination based on six (6) different ring plans based on time of day and the day of the week. The systemoperator (intercom dial “0”) can also be a different station group for each ring mode.Automatic / ManualRing destinations will automatically change based on time of day and day of week.At any time the system can be manually forced into a specific ring plan. It will remain in this ring plan untilmanually taken out.4.24