Samsung OFFICESERV 100 Series System Administration & Special Features Manual

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Contents

22iDCS KEYSETSDS 5000 SERIES KEYSETSOpen customer programming and follow the instructions below.ACTION DISPLAY1. Press TRSF and then dial 105 [201] SPEED DIALDisplay shows 00 :2. Dial the station number (e.g., 205) OR [205] SPEED DIALpress UP or DOWN to select the station 00 :and press the right soft key to move thecursor OR press the left soft key to goto step 43. If the selected station has no speed dial [205] SPEED DIALbins, this display will be shown and a new SPDBLK NOT EXISTstation may be selectedA C ETransferSpeakerVOLUMEB D F28D KEYSET, 18D KEYSETPROGRAMMABLE KEYS LAYOUT8D KEYSET PROGRAMMABLEKEYS LAYOUTTransfer SpeakerA BC DE F7S KEYSET PROGRAMMABLEKEYS LAYOUTCA B D E F14D KEYSET PROGRAMMABLEKEYS LAYOUTCA B D E F21D KEYSET PROGRAMMABLEKEYS LAYOUTCA B D E F234. Dial the location number (e.g., 05) OR [205] SPEED DIALpress UP or DOWN to select the location 05: _and press the right soft key to move thecursor OR press the left soft key to returnto step 25. Enter the trunk access code (e.g., 9) [205] SPEED DIALfollowed by the number to be dialed 05 : 9-4264100_(e.g., 4264100) OR press the rightsoft key to return to step 2 OR press theleft soft key to return to step 3 OR pressHOLD to clear an entry (if an error is made,use the DOWN key to step back)6. Press the F key to access Program StationSpeed Dial Names OR press TRSF to saveand exit programming OR press SPK to saveand advance to the next programDEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMEDPROGRAM PERSONAL SPEED DIAL NAMESFOR OTHER STATIONSEach individual station user can program his/her own names but in cases where itis impractical or for single line telephone users, this program allows a systemadministrator to view or change any station’s speed dial names. The station speeddial codes are 00–49. Each station begins with ten numbers (00–09) and can beassigned more in blocks of ten up to a maximum of fifty numbers.PROGRAM KEYSUP & DOWN - Used to scroll through extension numbers and speed dial bins.KEYPAD - Used to enter selections.SOFT KEYS - Move cursor left and right.SPK - Used to store data and advance to next program.HOLD - Used to clear previous entry.ANS/RLS - Used to select ALL.ACTION DISPLAY1. Press TRSF and then dial 106 [201] SPEED NAMEDisplay shows 00: