Samsung NE59J342 Series User Manual

Also see for NE595R0: User manual User manual User manual

Maintaining your appliance _46MAINTAINING YOUR APPLIANCESTEAM-CLEANINGHow to set the oven for steam-cleaningFor light cleaning, the Steam-cleaning function saves time and energy. For heavier-duty cleaninggrease, use the self-cleaning function.1. Remove all accessories from the oven.2. Pour approximately 10 oz. (300 ml) of water onto the bottom of theempty oven and close the oven door.Use normal water only, no distilled water.3. Press the Steam Clean pad.4. Press the Start/Set pad.When the operation is complete, the display will blink and a beepwill sound.5. Press the Clear/Off pad.6. Clean the oven’s interior.There will be a significant amount of water remaining on thebottom of the oven after a steam-cleaning cycle. Remove theresidual water with a sponge or soft dry cloth.When steam-cleaning, use exactly 10 oz. of water since this produces the best results.If you press the Steam Clean pad when the oven temperature is above 100 ˚F, Hot willappear in the display. Because these functions produce the best results when started whilethe oven is cool, we recommend that you wait until the oven has cooled down and Hotdisappears from the display.After a steam-cleaning cycle• Take care when opening the door before a steam-cleaning procedure has ended. The water onthe bottom is hot.• Open the oven door and remove the remaining water with a sponge. Do not leave the residualwater in the oven for any length of time. Wipe the oven clean and dry with a soft cloth. Do notforget to wipe under the oven door seal.• Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven interior.Remove stubborn residue with a nylon scourer. You can remove lime deposits with a clothsoaked in vinegar.• If the oven remains dirty, you can repeat the procedure once the oven has cooled.• For heavy residue, such as grease left over from roasting, we recommend that you rubdetergent into the residue before activating the steam-cleaning function.• After cleaning, leave the oven door ajar at a 15° angle to allow the interior enamel surface to drythoroughly.NE595R0ABSR_AA_DG68-00433A-09_EN.indd 46 2016-03-30 �� 8:04:53