Samsung NE59J342 Series User Manual

Also see for NE595R0: User manual User manual User manual

Operating the oven _40OPERATING THE OVENConvection auto conversion featureWhen you use the auto conversion feature, the convection auto conversion feature willautomatically convert entered regular baking temperatures to convection baking temperatures.If this feature is activated, the display will show the actual converted (reduced) temperature. Forexample, if you enter a regular recipe temperature of 350 °F and press the START/SET pad, thedisplay will show the converted temperature of 325 °F.How to disable or enable the auto conversion feature1. Press Conv. Bake and 0 on the number pad at the same time for3 seconds.The display will show Con On (enabled) or Con OFF (disabled).The default setting is Con OFF.2. Press 0 on the number pad to select Con On or Con OFF.Pressing 0 on the number pad changes the mode between ConOn and Con OFF.3. Press the Start/Set pad.Thermostat adjustmentThe temperature in the oven has been preset at the factory. When first using the oven, be sure tofollow recipe times and temperatures. If you think the oven is too hot or too cool, the temperaturein the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that ishigher or lower than the recommended temperature. The baking results should help you to decidehow much of an adjustment is needed.The oven temperature can be adjusted ±35 °F (±19°C).How to adjust the oven temperature1. Press Bake and 0 on the number pad at the same time for 3seconds.The display will show AdJ 0.2. Enter the adjustment you want, eg. 20 °F, using the number pad.You can adjust the temperature so that it is lower than the factorysetting by pressing the Bake pad.3. Press the Start/Set pad.This adjustment will not affect the broiling or the self-cleaning temperatures. The adjustmentwill be retained in memory after a power failure.NE595R0ABSR_AA_DG68-00433A-09_EN.indd 40 2016-03-30 �� 8:04:49