When you receive an off-hook voice announcement, you will hear theannouncement in the handset receiver or over the keyset speaker whilecontinuing to speak to the original party.• Press the flashing CALL button on your keyset. This will place theoriginal party on hold and allow you to talk to the announcingparty.• To return to your first party, press the key corresponding to youroriginal call. This will disconnect the OHVA call.OHVA BLOCKYour keyset can be programmed with an OHVA Block (OHBLK) key.Pressing this key will prevent anyone from making and OHVA to youuntil you press the button again and cancel the blocking.OHVA REJECTYour keyset can be programmed with an OHVA Reject (REJECT) key.Pressing this key while receiving an OHVA call will disconnect thevoice announcing party abd return you to your original call.IN GROUP/OUT OF GROUPIf your keyset is assigned to a station ring group, you can remove yourkeyset from the group and then put it back in. While you are out of thegroup, you can receive calls to your extension number but not calls tothe group number. If you have an IN/OUT key:• Press the IN/OUT key. It will light red when your keyset is in thegroup.• Press the IN/OUT key again to exit the group and turn the light off.Repeat as necessary.If you do not have an IN/OUT key:39≈∞∆˘ 99.1.20 2:58 PM ∆‰¿Ã¡ˆ39