ANSWERING AN OUTSIDE CALL• Lift handset and you are automatically connected to the ringing call.See Ring Preference under Customizing Your Keyset - OR - press theANS/RLS key to automatically answer on the speakerphone.NOTE: If a call is flashing at your keyset but not ringing, you mustpress the flashing button to answer.UNIVERSAL ANSWER DEVICEOutside lines can ring over the paging system or to a loud ringer. Toanswer calls ringing in night service to this device, dial 67 or press theUA key. This device can operate in the Day or Night mode.NOTE: If the Hot Keypad feature has been turned off, you must firstlift the handset or press SPK before dialing.RECALL DIAL TONEPress the NEW button to disconnect your existing call, wait for dialtone and then make a new call on the same line.NOTE: If this button does not appear on your keyset, the FLASH keymay be programmed to recall dial tone.SENDING A FLASHWhile on an outside call, press the FLASH key to send a flash to thetelephone company. This is required for some custom calling featuresor CENTREX use.12≈∞∆˘ 99.1.20 2:58 PM ∆‰¿Ã¡ˆ12
