Samsung LCD12B User Manual

Also see for 6B ENHANCED: User guide User guide

Contents

19NOTE: If the Hot Keypad feature has been turned off, you must firstlift the handset or press the SPK key before you begin dialing.TRANSFERRING CALLSTransfer is used to send any call to another extension in one of twoways. You can do a screened transfer by informing the other extensionwho is calling or you can do a blind transfer without notification.• While on a call, press the TRSF key and dial an extension number orgroup number. You call is automatically put on transfer hold.ORPress a DSS key or station group key. Your call is automatically puton transfer hold.• Hang up when you hear ringing (this is an unscreened or blindtransfer).OR• Wait for the called party to answer and advise him/her of the calland hang up. If the transfer is refused, you will be reconnected to theoutside line when the called station hangs up or you can press TRSFto return to the outside party. If you wish to send the call to anotherextension without waiting for the fitst station to hang up, simplypress another DSS button.ORPress the CALL button or C.O. line key to return to the outsideparty and begin the transfer press again.When you are the transferring a call to a keyset set for Voice Announceor Auto Answer, the transferred call will always ring.NOTES: 1. After the inside party answer, you may alternate back andforth between the parties by pressing the TRSF key.2. If you receive No More Calls tone, that station has no keyavailable to receive another call. Press TRSF to return tothe other party.≈∞∆˘ 99.1.20 2:58 PM ∆‰¿Ã¡ˆ19