Samsung HT-J7750W User Manual

Also see for HT-J7750W: User manual User manual User manual User manual User manual

Contents

50 - EnglishAppendixAdditional InformationNotesConnectionsHDMI OUT~ Certain HDMI output resolutions may not work,depending on your TV.~ You must have an HDMI connection to enjoy videoswith 3D technology.~ A long HDMI cable may cause screen noise. If thisoccurs, set HDMI Deep Colour to Off in the menu.Settings3D Settings~ For some 3D discs, to stop a movie during 3Dplayback, press the e (EXIT) button once.The movie stops and the 3D mode option is de-activated.To change a 3D option selection when you areplaying a 3D movie, press the e (EXIT) buttononce. The Blu-ray menu appears. Press the e(EXIT) button again, then select 3D Settings in theBlu-ray menu.~ Depending on the content and the position of thepicture on your TV screen, you may see verticalblack bars on the left side, right side, or both sides.TV Aspect Ratio~ Depending on the disc type, some aspect ratiosmay not be available.~ If you select an aspect ratio and option which isdifferent than the aspect ratio of your TV screen, thepicture might appear to be distorted.~ If you select 16:9 Original, your TV may display 4:3Pillarbox (black bars on the sides of the picture).BD Wise (Samsung Products only)~ When BD Wise is On, the Resolution settingautomatically defaults to BD Wise and BD Wiseappears in the Resolution menu.~ If the product is connected to a device that doesnot support BD Wise, you cannot use the BD Wisefunction.~ For proper operation of BD Wise, set the BD Wiseoption in both the product and the TV to On.Digital Output~ Be sure to select the correct Digital Output or youwill hear no sound or just loud noise.~ If the HDMI device (AV receiver, TV) is notcompatible with compressed formats (Dolby Digital,DTS), the audio signal outputs as PCM.~ Regular DVDs do not have BONUSVIEW audio andNavigation Sound Effects.~ Some Blu-ray Discs do not have BONUSVIEWaudio and Navigation Sound Effects.~ This Digital Output setup does not affect theanalogue (L/R) audio or HDMI audio output to yourTV.It affects the optical and HDMI audio output whenyour product is connected to an AV receiver.~ If you play MPEG audio soundtracks, the audiosignal outputs as PCM regardless of your DigitalOutput selections (PCM or Bitstream).~ Digital Output can be activated when SoundOutput is set to TV Speaker.BD-Live Internet Connection~ The Internet connection may be restricted while youare using BD-LIVE contents.Anynet+ (HDMI-CEC)~ Depending on your TV, certain HDMI outputresolutions may not work. Please refer to the usermanual of your TV.~ This function is not available if the HDMI cable doesnot support CEC.~ If your Samsung TV has an Anynet+ logo, then itsupports the Anynet+ function.BD Data Management~ In the external memory mode, disc playback maybe stopped if you disconnect the USB device in themiddle of playback.~ Only those USB devices formatted in the FAT filesystem (DOS 8.3 volume label) are supported.We recommend you use USB devices that supportthe USB 2.0 protocol with 4 MB/sec or faster read/write speeds.~ The Resume Play function may not work after youformat the storage device.~ The total memory available to BD DataManagement may differ, depending on conditions.DivX® Video On Demand~ For more information about DivX(R) VOD, visit“http://vod.divx.com”.