Samsung HT-J7750W User Manual

Also see for HT-J7750W: User manual User manual User manual User manual User manual

Contents

12 - EnglishConnectionsConnecting to a TV and External DevicesHDMI OUT HDMI IN1 2LANAUX IN FM ANTOPTICALDIGITALAUDIO INLROPTICAL OUTAUDIO OUTHDMI OUTHDMI IN (ARC)HDMI OUT HDMI IN1 2LANPOWERAUX IN FM ANTOPTICALDIGITALAUDIO INLRSPEAKERS OUTCENTERSUBWOOFERFRONT LFRONT RFRONT TOP LFRONT TOP RIMPEDANCE : 3 Method 1 Method 3Method 2R RedW WhiteExternalDevicesConnecting to a TVConnect an HDMI cable from the HDMI OUT jack on the back of the product to the HDMI IN jack on your TV. If theTV supports ARC, you can hear the audio from your TV through the home cinema with only this cable connected.See page 18 in this manual and the section on ARC in your TV's user's manual for details.Connecting to External DevicesMethod 1 HDMI IN : Connecting to an External Component with an HDMI CableConnect an HDMI cable from the HDMI IN jack on the back of the product to the HDMI OUT jack on your digitaldevice.  Select the HDMI1 or HDMI2 mode.Method 2 AUX IN : Connecting an External Analogue ComponentUsing an RCA audio cable (not supplied), connect the AUDIO In jack on the product to the AUDIO Out jack onthe external analogue component.  Select the AUX mode.~ Be sure to match the colours on the cable plugs to the colours on the input and output jacks.Method 3 OPTICAL : Connecting an External Digital Audio ComponentUse to connect the digital audio output of digital signal components such as Cable Boxes and SatelliteReceivers (Set-Top-Boxes) to the home cinema. Using a digital optical cable (not supplied), connect the OpticalDigital Audio In jack on the product to the Digital Optical Out jack of the external digital device using a digitaloptical cable.  Select the D. IN mode.✎ To see video from your Cable Box/Satellite receiver, you must connect its video output directly to your TV.✎ This system supports Digital sampling frequencies of 32 kHz or higher from external digital components.✎ This system supports only DTS and Dolby Digital audio. MPEG audio, a bitstream format, is not supported.Selecting an External Device to UseTo select an external device after you have connected it, press the SOURCE button. Each time you press thebutton, the mode changes in this order : BD/DVD D. IN AUX HDMI1 HDMI2 FM BT