Samsung DW80J755 Series User Manual

Also see for DW80H994 Series: User manual User manual User manual Installation guide User manual

English - 28INFORMATION CODESThe Control Panel displays information codes to help you understand what is occurring with yourdishwasher.Code ActionOCOver-level water check• Functional check. Close the water supply valve and go to your house circuitbreaker panel, set the dishwasher’s circuit breaker switch to off, and thencontact an authorized Samsung service centre.LCLeakage check• If a water supply valve connection leak occurs, close the water supply valveand go to your house circuit breaker panel, set the dishwasher’s circuit breakerswitch to off, and then contact the installer to fix.If the problem continues, contact an authorized Samsung service centre.4CWater supply check• Check if the water supply valve is closed, the water supply is suspended, or thewater inlet valve or line is frozen or clogged by foreign particles.If the problem continues, close the water supply valve, and then contact anauthorized Samsung service centre.5CDrain check• After closing the water supply valve, check whether the drain hose is clogged orfolded. Also, check whether drain hole inside sump is clogged.If the problem continues, contact an authorized Samsung service centre.HCHigh temperature heating check• Functional check. With the dishwasher empty, add detergent, and then run acycle.If the problem continues, go to your house circuit breaker panel, set thedishwasher’s circuit breaker switch to off, and then contact an authorizedSamsung service centre.3CPump operation check• Functional check. Turn off the dishwasher and try to start it again.If the problem continues, contact an authorized Samsung service center.For any codes not listed above, call 1-800-SAMSUNG (726-7864)troubleshootingDW80H994_DD68-00164B_EN.indd Sec7:28DW80H994_DD68-00164B_EN.indd Sec7:28 2015-01-06 4:17:032015-01-06 4:17:03